Сортировка 1   Сортировка 2    
  • Продукт

    Stainless Steel Pipes - Round - Stainless Steel Tube  (Cold Rolled Seamless Pipe - Tensile 515-750MPa, ∅6-426mm, Thickness...) - FOB China

  • Запрос:
  • Краткое описание: Stainless Steel Tube for making Heat Exchanger
  • Детальное описание:

    Tube for Heat Exchanger
    Process: Cold rolled or cold drawn, Annealed & Pickled / Solution treatment
    Grades: TP304, TP304H, TP316, TP316L, TP321
    Standards: ASTM A213/ ASME SA213/ GB T13296/JIS G3463/DIN17458/EN10216-5
    Size: O.D. 12.00mm - 168.00mm;   W.T. 1.00mm - 6.00mm
    Capacity: 1000 Tons per month
    Lead time: 45 days

  • Детали компании, кто опубликовал данную продукцию

    Компания Страна Штат/Регион Фото компании Сток продуктов/текущие цены Краткое описание
    1 Wuxi Xinchang Steel Pipe Co. Ltd
    Wuxi Xinchang Steel Pipe Co. Ltd
    Китай.htmlКитай Цзянсу Wuxi Xinchang Steel Pipe Co., Ltd. is a professional manufacturer of seamless stainless steel pipes and tubes, which was established at the end of 1980s, located in Wuxi city, near Suzhou and Shanghai.
    Местное название компании:
    无锡鑫常钢管有限责任公司

    Тип бизнеса:

    Список продукции:

    Сертификация компании:

    Число работников в компании:

    Размер ежегодных продаж:

    Телефон:
    +86 133 72307896

    Компании e-mail:

    Вебсайт компании:

    Всего: 1 запись     Перейти Компании »
  • Пользователь, кто опубликовал данную продукцию

    Полное Имя Компания Проверенный Производитель Должность Телефон E-mail адрес Страна Дата Регистрации на Steelads.com
    1 Mr. Rocky L Wuxi_Xinchang_Steel_Pipe_Co_Ltd.htmlWuxi Xinchang Steel Pipe Co. Ltd Sales +86 133 72307896 - Вход на Steelads - Китай.htmlКитай 15 Июл 2017
    Publisher Location (according to IP address):

    Всего: 1 запись     Перейти Список работников металлургических компаний »
  • Страны описание

    Название страны Столица Регион Площадь страны Население
    1 Китай Beijing Eastern Asia 9,572,900 кв. км 1,277,558,000 людей
    Всего: 1 запись     Перейти Страны »
      • Stainless Steel Pipes - Round - Stainless… Стандарты

        Standard No Society Summary
        1 ASTM A312 ASTM
        2 ASTM A269 ASME
        3 ASTM A213 ASTM Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes. This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes. Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. The tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched in water or rapidly cooled by other means. Tension test, hardness test, flattening test, and flaring test shall be done to each tube. Also, each tube shall be subjected to the nondestructive electric test or hydrostatic test.
        Область Действия:

        1. Scope

        1.1 This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes, designated Grades T5, TP304, etc. These steels are listed in Tables 1 and 2.

        1.2 Grades containing the letter, H, in their designation, have requirements different from those of similar grades not containing the letter, H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements.

        1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.500 in. [0.4 to 12.7 mm], inclusive, in minimum wall thickness or, if specified in the order, average wall thickness. Tubing having other diameters may be furnished, provided such tubes comply with all other requirements of this specification.

        1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.


        Webpage:

        Всего: 3 записей     Перейти Стандарты »




      О нас Компании Последние продукты Просмотр фото продуктов Old Steelads Website TOP25 Мировых Производителей Стали Мой IP Адрес

      Авторское право © 2004-2015 B2B Metal & Steel Products Steelads.com, Gcoupon.com. Все права защищены.
      База данных зарегистрирована в Лондоне, Великобритания. Email:

      My IP Address powered by Myip.ms Facebook bot last visit time powered by Myip.ms
      World No.1 Global Classified Metal & Mineral Products Database
      Дизайн